This dual-bit noninverting bus transceiver uses two separate configurable power-supply rails. The A port isdesigned to track SN74LVC2T45DCUR（购买请点击）. VCCA accepts any supply voltage from 1.65 V to 5.5 V. The B port is designed to trackVCCB. VCCB accepts any supply voltage from 1.65 V to 5.5 V. This allows for universal low-voltage bidirectionaltranslation between any of the 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodesLVC2T45DCUR_icSN74LVC2T45DCUR（购买请点击）.
The LVC2T45DCUR_ic_369715_125299392.SN74LVC2T45DCUR（购买请点击）is designed for asynchronous communication between data buses. The device transmitsdata from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at thedirection-control (DIR) input.
Features
Available in the Texas Instruments；
NanoStar and NanoFree Packages；
Fully Configurable Dual-Rail Design Allows；
Each Port to Operate Over the Full 1.65-V to；
5.5-V Power-Supply RangeSN74LVC2T45DCUR（购买请点击）；
VCC Isolation Feature − If Either VCC Input；
Is at GND, Both Ports Are in the；
High-Impedance State；
DIR Input Circuit Referenced to VCCASN74LVC2T45DCUR（购买请点击）；
Low Power Consumption, 10-μA Max ICC；
±24-mA Output Drive at 3.3 V。
版权所有