The DS91C176TMA/NOPB（购买请点击） for multipoint applicationswith multiple drivers or receivers. Multipoint LVDS (M-LVDS)is a new bus interface standard (TIA/EIA-899) based onLVDS but including several to improve multipointperformance. M-LVDS have superior drivecapability and can32 loads. Along with increaseddrive, rate to minimize reflections and EMIDS91C176TMA/NOPB（购买请点击）. The 1nSec minimum edge rate 2inches in length. M-LVDS devices also have a very largecommon mode range for additional noise margin in heavilyloaded 。
The DS91C176/DS91D176 are half-duplex transceivers thataccept LVTTL/LVCMOS signals at the driver inputs and convertthem to differential M-LVDS signal levelsDS91C176TMA/NOPB（购买请点击）. The receiverinputs accept low voltage differential signals (LVDS,B-LVDS, M-LVDS, LV-PECL) and convert them to 3V LVCMOSsignals. The DS91C176 receiver contains an M-LVDStype 2 failsafe circuit with an internal 100 mV offset thatprovides a LOW output for both short and open input conditions.
Features
Meets TIA/EIA-899 M-LVDS Standard;
Capable of driving 32 LVDS loads;
Controlled Edge Rates Tolerant to Stubs;
Wide Common Mode for Increased Noise Immunity;
DS91C176 has type 2 Fail-safe supportDS91C176TMA/NOPB（购买请点击）;
Up to 200 Mbps operation;
Industrial temperature range;
Single 3.3V supplyDS91C176TMA/NOPB（购买请点击）.;
8-lead SOIC package.
版权所有