Monolithic 12-Bit 10 MSPS A/D Converter
Low Noise: 0.26 LSB RMS Referred-to-Input
No Missing Codes Guaranteed
Differential Nonlinearity Error: 0.5 LSB
Signal-to-Noise and Distortion Ratio: 68 dB
Spurious-Free Dynamic Range: 75 dB
Power Dissipation: 1.03 W
Complete: On-Chip Track-and-Hold Amplifier and
Voltage Reference
Twos Complement Binary Output Data
Out-of-Range Indicator
28-Lead Ceramic DIP or 44-Terminal Leadless Chip
Carrier Package
AD872AJD产品说明
The AD872A is a monolithic 12-bit, 10 MSPS analog-to-digital converter with an on-chip, high performance track-and-hold amplifier and voltage reference. The AD872A uses a multistage differential pipelined architecture with error correction logic to provide 12-bit accuracy at 10 MSPS data rates and guarantees no missing codes over the full operating temperature range. The AD872A is a redesigned version of the AD872 which has been optimized for lower noise. The AD872A is pin compatible with the AD872, allowing the parts to be used interchangeably as sys-tem requirements change.
The low noise input track-and-hold (T/H) of the AD872A is ideally suited for high-end imaging applications. In addition, the T/H’s high input impedance and fast settling characteristics al-low the AD872A to easily interface with multiplexed systems that switch multiple signals through a single A/D converter. The dynamic performance of the T/H also renders the AD872A suit-able for sampling single channel inputs at frequencies up to and beyond the Nyquist rate. The AD872A provides both reference output and reference input pins, allowing the onboard reference to serve as a system reference. An external reference can also be chosen to suit the dc accuracy and temperature drift require-ments of the application. A single clock input is used to control all internal conversion cycles. The digital output data is pre-sented in twos complement binary output format. An out-of-range signal indicates an overflow condition, and can be used with the most significant bit to determine low or high overflow.
REV. A
Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
The AD872A is fabricated on Analog Devices’ ABCMOS-l process that utilizes high speed bipolar and CMOS transistors on a single chip.
The AD872A is packaged in a 28-lead ceramic DIP and a 44-terminal leadless ceramic surface mount package (LCC). Opera-tion is specified from 0°C to +70°C and –55°C to +125°C.
AD872AJD产品
The AD872A offers a complete single-chip sampling, 12-bit 10 MSPS analog-to-digital conversion function in a 28-lead DIP or 44-terminal LCC.
Low Noise—The AD872A features 0.26 LSB rms referred to-input noise.
Low Power—The AD872A at 1.03 W consumes a fraction of the power of presently available hybrids.
On-Chip Track-and-Hold (T/H)—The low noise, high imped-ance T/H input eliminates the need for external buffers and can be configured for single-ended or differential inputs.
Ease of Use—The AD872A is complete with T/H and voltage reference and is pin-compatible with the AD872.
Out of Range (OTR)—The OTR output bit indicates when the input signal is beyond the AD872A’s input range.
版权所有