DG508ACJZ相关数据资料

    <strong>CMOS Analog Multiplexers

    The DG508ACJZ is a CMOS Monolithic 8-Channel Analog  Multiplexer, which can also be used as a demultiplexer. An  enable input is provided. When the enable input is high, a  channel is selected by the address inputs, and when low, all  channels are off.

    A channel in the ON state conducts current equally well in both directions. In the OFF state each channel blocks  voltages up to the supply rails. The address inputs and the enable input are TTL and CMOS compatible over the full  specified operating temperature range.

    The DG508A is pinout compatible with the industry standard  devices.

    DG508ACJZFeatures

    · Low Power Consumption

    · TTL and CMOS-Compatible Address and Enable Inputs

    · 44V Maximum Power Supply Rating

    · High Latch-Up Immunity

    · Break-Before-Make Switching

    · Alternate Source

    · Pb-free Available

    Applications

    · Data Acquisition Systems

    · Communication Systems

    S Ana-

    · Signal Multiplexing/Demultiplexing  log

    Multi-

    · Audio Signal Multiplexing

    Ordering Information

    NOTE: Intersil Pb-free products employ special Pb-free material  sets; molding compounds/die attach materials and 100% matte tin  plate termination finish, which is compatible with both SnPb and  Pb-free soldering operations. Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020C.

    Pinout

    DG508A （PDIP, CERDIP）

    TOP VIEW

    Truth Table

    DG508ACJZ

    A0 , A1 , A2 , EN

    Logic “1” = VAH ≥2.4V, Logic “0” = VAL ≤ 0.8V